10 Compelling Reasons Why You Need paintless hail dent repair

Car dents appear on a vehicle's body due to various reasons. One probable cause is a minor road accident. Or it may also be due to a hailing storm that just so happens to pass by when your car's parked in the open. Whichever the cause, car dents can nevertheless be unsightly.

™

When the car dent is too big or complicated, then it would wise and practical to take your vehicle to the auto body shop with appropriate tools that can be used to repair your car properly. However if the dent on the car seems like something you can repair on your own, then settle on a more practical DIY car dent repairs.

Assessing the damage is the first step you need to do, you need to closely look at the car dent. If the metal has ripples and bumps that make the metal surface appear to have been folded, no question, your car needs a professional repairer. Otherwise, the car dent repair may just be done your own. There are common dents, which have not managed to crease and crumple the metal, that can be repaired just by tapping or popping it out back. For heavily dented car metal surfaces, a smart and logical solution is to just buy a panel replacement for that car section where the dent is.

image

For DIY car dent repairs, one useful tool that you will need is a common plunger. Just make sure the plunger is clean, though. Place the plunger on top of the car dent. In a considerably slow action and in steady manner, depress the plunger as you use it in the bathroom until no air remains. Make sure too that the plunger's rubber head and the panel have a tight seal in between them. Then holding the plunger with a strong and heavy grip, steadily pull the plunger to pop out the dent from the metal surface of the car. For a more effective and tighter sealing, a useful tip is to slightly wet the rubber head of the household plunger. This process is ideal for use in side panels of the car where tapping procedure may be hard to accomplish.

The car's hood, roof, trunk or parts of the vehicle which are flat and large are ideally applied with the tapping method of repairing car dents. The required materials for this methods are rubber mallet, block of wood and piece of old towel. The size of the car dent and the area you will be working with determine the measurement of the wood block you will use. However, the most preferable and convenient block of wood to use is one which you can grip comfortably with just a single hand.

The towel is to be wrapped around the wooden block. The block of wood obviously have edges or possibly some rough surfaces that will likely scratch the paint or the interior lining of the car. This is the reason why the block is wrapped with the old towel. Lay the block gently on the opposite side of the metal panel where the dent is then start tapping with the use of rubber mallet. Perform the task slowly and make sure you hit the wood on its flat surface and not on its edges.

Windshield replacement is not usually at the top of our to do lists. But when a hail storm hits like the one that took out half of Round Rock Texas this past march, auto glass repair is the only thing on your mind when you wake up to a glassless vehicle. Our homes and vehicles usually take the brunt of the storm damage since a lot of us do not all have the option to keep our vehicles covered or protected. Our cars can incur a lot of auto body damage from rain, hail, or from the wind paintless hail dent repair blowing other items on to your vehicles and causing a ton of damage. If your vehicle is damaged during a storm, what should you do to get it repaired?

You  need to check first with your insurance provider to see if you have coverage for any storm damage. They will let you know if and what they will cover. They will also let you know what your deductible is for the repairs. If you use your insurance to help pay for the auto glass and body repairs remember that the law allows you to choose whoever you want to fix your vehicle. You may be happy to find that many times the repairs are less expensive then you thought. If you have insurance, use it, it can save you a lot of money and comprehensive claims usually don't hurt your rates.

Next you need to decide if you are going to replace your windshield or try and have the chips repaired. Chip repairs take less time to complete and will cost much less as well. Auto body repairs that can be completed at most auto body shops but windshield repair and replacement takes a specialty shop. The repairs come out looking great in the end and it is hard to notice that there was damage to begin with. Also the repairs hold up safety wise just as good as the replacement does. If the damage is in the line of vision of the driver, replacement is the only legal option. Line of vision is the area in front of the driver in the windshield, usually about the size of a medium pizza box.

Your next step is to choose an auto glass shop for the repair. It is critical that you look around for an auto glass shop that will produce the highest quality work for your car or truck. You should start by asking around to check the reputation of auto glass shops around you. Research them online too and see what kind of reviews they have. Don't fall for fake reviews often written by the shop themselves. They are pretty easy to spot, if you see 10 review of 5 stars by people who only review one site, you can bet they are fluff. Get free estimates from all the places you are considering. Most glass shops will accept all insurance companies but ask just in case.

Don't wait, get started immediately on getting that auto glass fixed, the longer you wait the more damage can be done. Just make sure that you remember that Auto Glass Replacement is a skilled trade and should not be left up to just anyone. Spend the time and find a shop that is worthy of your business.